TM 5-6675-316-14
12-6.5
Pin Punch Register.
a.
Remove from wall mount to working surface and attach punch lever.
b. Set slide gage to proper position.
c.
Insert material into throat.
d.
Press punch lever down and punch register holes.
12-6.6 Operating Instructions on Decals and Instruction Plates.
WARNING
THIS DEVICE IS NOT TO BE USED IN “HAZARDOUS
LOCATIONS” AS DEFINED BY UNDERWRITERS LABORA-
TORIES. IT SHOULD BE GROUNDED IN ACCORDANCE
WITH PROVISIONS OF THE NATIONAL ELECTRIC CODE,
OR ANY APPLICABLE LOCAL CODE, AND MAINTAINED
IN ACCORDANCE WITH MANUFACTURER’S RECOMMEN-
DATIONS.
WARNING!
ELECTRIC SHOCK COULD
OCCUR IF USED ON
WET SURFACES. DO
NOT EXPOSE TO RAIN–
STORE INDOORS.
12-7. OPERATION UNDER UNUSUAL CONDITIONS. This equipment is designed for
operation only in a controlled environment.
12-19
