TM 5-6675-316-14
h.
i.
j.
k.
l.
m.
n.
o.
P.
q.
r.
s.
Using top pressure roller as handle, lift coating roller carriage until
it stands straight up.
Allow time for wax tray to cool and wax to harden.
Remove screws holding wax tray.
Tag and disconnect heater element wires.
Lift out wax tray.
Pop out defective element from recess underneath tray.
Insert new element in recess and reinstall wax tray and secure with
screws.
Reconnect heater element wires.
Heat wax and when melted lower roller carriage gently in place.
Press gently on both sides to be sure of seating.
Reinstall inner panel.
Reinstall top deck cover and top roller cover.
8-78
