TM 5-6675-316-14
d. Loosen, but do not remove socket head setscrew.
e.
Remove center bolt and
f. Remove bolts, washers,
pillow block assembly.
washer.
lockwashers, and nuts; remove defective
9.
Install new pillow block assembly and secure with nuts, lockwashers,
washers, and bolts.
h. Grease bearing (paragraph 7-11.1).
i.
Reinstall washer and center bolt.
j.
Tighten socket head setscrew.
k. Remove table top assembly supports.
7-33