TM 5-6675-316-14
Section Ill OPERATOR MAINTENANCE
5-8. LUBRICATION INSTRUCTIONS.
This equipment does not require lubrication.
5-9. TROUBLESHOOTING PROCEDURES.
a.
The table lists the common malfunctions which you may find during the
operation or maintenance of the zoom stereoscope, or its components.
YOU should
perform the test/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur nor all test or
inspections and corrective actions.
If a malfunction is not listed or is not
corrected by listed corrective action, notify your supervisor.
Table 5-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
LEFT EYEPIECE FOCUSING SLEEVE IS NOT EFFECTIVE.
Step 1.
Check to see if eyepiece is seated at bottom of eyepiece tube.
(a) If seated, proceed to step 2.
(b) Reseat eyepiece tube.
Step 2.
Check to see if optical lenses are dirty.
(a) If lenses are dirty, clean.
(b) If lenses are clean, replace stereoscope.
2. STEREOPAIR CANNOT BE BROUGHT INTO FUSION.
Check to see if optical lenses are dirty.
(a) Clean optical lenses.
(b) Replace stereoscope.
5-10. MAINTENANCE PROCEDURES. There are no operator maintenance procedures
assigned for this equipment.
5-26
