TM 5-6675-316-14
5-6.4 Preparation for Movement.
CAUTION
l
l
a.
b.
c.
d.
e.
f.
9.
h.
i.
j.
k.
Internal components of stereoscope are precisely alined. Stereoscope
must be protected from shock, jolting, and sudden or extreme temperature
changes.
When not in use, stereoscope should be stored in transport case.
Do not touch optical glass surfaces with fingers. Fingerprints will
smudge optical surfaces and may etch optical glass or glass coatings.
Remove
Remove
rubber eye guards
eyepiece tubes by
by pulling gently from eyepiece
pulling straight out from pod.
Place eyepiece tubes in storage containers.
Place plastic dust caps in eyepiece holes in pod.
Unscrew monocular lens and remove from adapter.
Store monocular lens in container.
Gently twist stereoscopic lenses to left and remove from
Store stereoscopic lenses in container.
CAUTION
tubes.
rhomboid arms.
To prevent dropping rhomboid arm on viewing surface, support each
rhomboid arm with one hand as screws are loosened.
Unscrew two thumbscrews on each rhomboid arm, remove rhomboid arms and store.
Loosen mounting screws on mount until pod is free from mount.
Lift pod free from mount. and remove by tilting pod toward operator to clear
adapter plate from mount as pod is removed.
1.
Store pod in container.
5-7. OPERATION UNDER UNUSUAL CONDITIONS. Operation of the zoom stereoscope is
limited to conditions that will not damage aerial roll film or the stereoscope.
5-25
