TM 5-6675-316-14
d. Remove capscrews and lift off fast-feed drive assembly housing.
CAUTION
To prevent damage to photographic film, do not allow lubricant or solvent
to contact any surface other than that being serviced.
e.
Clean exposed worm gear and worm with bearing cleaner.
f. Dry exposed worm gear and worm.
9.
Spray worm and worm gear with lubricant. Wipe off excess lubricant.
h. Reinstall fast-feed drive assembly. Secure with capscrews.
i.
Reinstall fast-feed bearing bracket. Secure with screws.
j.
Remove optics and move optical mount to lowest limit of travel.
NOTE
Do not proceed unless collimation equipment is available.
4-62
