TM 5-6675-315-14
a.
Turn power off and unplug power cord.
b. Remove screws and move cover to expose rear of lamp control box.
c.
Remove bezel nut.
Withdraw ON/OFF switch from back.
NOTE
Wiring is connected to cover and switches.
d.
Tag and desolder wires from ON/OFF switch.
e.
Solder wires to new ON/OFF switch.
f.
Install new ON/OFF switch and secure with bezel nut.
NOTE
Be certain wires are not loose, crossed, or disconnected before securing
cover.
Green (ground) wire is connected to cover screw.
9.
Reinstall cover and secure with socket head screws.
h.
Plug in power cord and turn power on.
4-45
