TM 5-6675-316-14
3-20.8
REAR OF DRAFTING/MEASURiNG TABLE
d. Remove four socket head capscrews from motor mount and defective fan
assembly.
e.
Install new fan assembly and secure with screws.
f. Reconnect fan wires to motor.
9.
Reinstall glass.
h. Plug in power cord.
Replace Di gititizing System Power Supply Fuse.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: 3 mm Hex Head Key Wrench
Flat Tip Screwdriver
SUPPLIES:
1 amp Fuse
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Unplug drafting table power cord.
3-160
