TM 5-6675-316-14
CAUTION
Disengage X or Y motor assembly before attempting removal of drive motor or
damage to rack and gear may result (paragraph 3-16.1 b (7) or 3-6.1b(12)).
i. Turn locking lever to right.
j. Slide motor mount to right.
k. Remove two nuts, washers, and drive motor assembly.
1. Measure and record gap between bottom of drive gear and motor.
m. Using hex head key wrench, loosen capscrew and remove drive gear.
n. Install drive gear on new motor and discard old motor.
o. Reinstall drive motor assembly.
p. Reinstall motor wire connector.
CAUTION
Connector retaining screws and pins are very fragile. Exercise care when
assembling or damage to pins or threads on screws may result.
q. Reinstall top connector assembly.
r. Reinstall carriage cover.
s. Plug in all power cords.
Change 1
3-153
