TM 5-6675-316-14
e.
Remove defective processor board.
CAUTION
Exercise extreme caution when installing processor board or damage and/or
wire breakage could result.
f. Carefully install new processor board and secure with screws.
9.
Reconnect connector.
CAUTION
Snug socket head capscrews only.
Do not tighten excessively or damage
to processor board could result.
h. Reinstall bottom plate and socket head capscrews.
i.
Plug in all power cords.
3-20.3 Replace Power SuppIV Fuse, 24 V.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: Thin Flat Tip Screwdriver
13 mm Combination Wrench
4 mm Hex Head Key Wrench
SUPPLIES:
15 amp Fuse
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Remove all power cords.
b. Remove DSP machine controller cabinet from shelf (paragraph 3-20.22).
3-148
