TM 5-6675-316-14
Table 3-9. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
DSP MACHINE CONTROLLER WILL NOT TURN ON.
Step 1.
Check if power cord is plugged into wall outlet.
(a) If plugged in, proceed to step 2.
(b) Plug in power cord.
Step 2.
Visually check for blown power fuse.
(a) Remove power cord from outlet.
(b) Remove fuse by pushing in and turning left.
(c) Visually observe if filament is broken or if fuse is darkened
from excessive heat.
(d) If the conditions exists, replace fuse.
(e) If trouble is not corrected, refer to organizational
maintenance.
3-127
