TM 5-6675-316-14
1-16.5 Replace Blackout/Dome
Light Microswitch.
MOS: 83FJ6, Reproduction Equipment Repairer
or
41B, Topographic Instrument Repair Specialist
TOOLS:
Flat Tip Screwdriver
6 in. Adjustable Wrench
SUPPLIES:
Microswitch
WARNING
Death or serious injury may occur from electrical shock unless power is
off before servicing.
a. Turn off blackout/dome light circuit breaker.
b. Remove conduit cover.
Remove nut and pull out switch to expose wiring.
c.
d.
Disconnect wires from defective switch.
Connect wires to new switch.
e.
f.
Install switch and secure with nut.
Adjust striker plate until plate contacts rollers.
g.
h.
Reinstall conduit cover.
i.
Turn on circuit breaker.
1-69