TM 5-6675-316-14
CAUTION
To prevent damage to equipment or air shocks duringtransportation,
inflate air shocks correctly. Do not exceed 90 psi(620 kPa) for the
composing machine, and drafting and measuring mach ine. Do not exceed
70 psi (483 kPa) for the split-stage light table.
(3) Inflate each mount until top of diaphragm is level as shown.
(4) Reinstall valve caps.
WARNING
Death or serious injury may occur if power cable is disconnected while
power is on.
f. Turn equipment switches OFF.
Turn main circuit breaker OFF.
g.
h. Turn safety switch OFF.
i. Have power cable disconnected at power supply end. Then disconnect power
cable from receptacle. Put cable in storage box" on-trailer chassis.
j . Turn emergency light switch OFF.
k. Disconnect telephone cables from power entry panel.
1-35
