TM 5-6675-315-14
f.
Tag and disconnect wires from defective switch.
g.
Install new switch and connect wires.
h.
Insert switch through cover plate and label plate.
NOTE
Be sure label plate is in same direction as when removed. Secure with bezel nut.
i.
Align cover plate with holes and secure with screws.
j.
Turn circuit breaker ON.
1-16.4 Replace On/Off Switch.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
SUPPLIES: Switch
WARNING
Death or serious injury may occur if switch circuit breaker is not turned off before working on
switch.
a.
Turn off appropriate circuit breaker.
1-66