TM 5-6675-315-14
(3)
Attach blower hose to exhaust end of blower and attach the sprayer to the other end of the hose, using
adapter.
NOTE
Thick liquids will take a few seconds to start spraying.
(4)
Turn on blower and point sprayer to a waste area for testing. To spray, cover hole at top with finger; to
stop spraying, remove finger from hole.
(5)
For light liquids, turn sprayhead in direction reading "LESS". For heavier liquids turn in direction
reading "MORE".
(6)
Regulate spray pattern by turning the fan adjustment on the sprayhead.
(7)
Immediately after using sprayer for painting, clean jar and spraygun thoroughly. To dismantle
adjustable spray control nozzle, twist to left, pull off, and clean by running cleaner through all openings. Reinstall nozzle.
4-6.2 Preparation For Movement. Check that the vacuum cleaner is properly stored in the container and securely held
with tiedowns.
4-6.3 Operating Instructions on Decals and Instruction Plates.
4-7. OPERATION UNDER UNUSUAL CONDITIONS . Do not use the vacuum cleaner on wet surfaces, nor expose it to
rain.
4-7
