TM 5-6675-315-14
Section II OPERATING INSTRUCTIONS
3-4. DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS . This equipment has no operator
controls or indicators.
35. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES . There are no operator PMCS procedures
assigned for this equipment.
36. OPERATION UNDER USUAL CONDITIONS.
3-6.1 Preparation For Movement. Check that portable equipment is properly secured with provided tiedowns.
37. OPERATION UNDER UNUSUAL CONDITIONS . This equipment is designed for operation only in a controlled
environment.
Section III OPERATOR MAINTENANCE
3-8. LUBRICATION INSTRUCTIONS . This equipment does not require lubrication.
3-9. TROUBLESHOOTING PROCEDURES.
There are no operator troubleshooting procedures assigned for this
equipment.
3-10. MAINTENANCE PROCEDURES.
a.
This section contains instructions covering operator maintenance functions for the cabinets and furniture.
Personnel required are listed only if the task requires more than one.
b.
After completing each maintenance procedure, perform operational check to be sure that equipment is properly
functioning.
3-10.1 Inspect Cabinets and Furniture. Inspect cabinets and furniture for structural damage, rust and proper operation of
all latches, hinges, drawer slides, and adjustment mechanisms.
3-3
