TM 5-6675-315-14
(9)
Press bale ejection switch until press ram begins to retreat.
NOTE
If power is lost or cut while press ram is moving, after power is restored. yellow return switch
must be pressed to get ram to move
(10)
When press ram has returned to start position, push any shreds that fell out of bale back into chamber.
(11)
Install a new plastic bag and reconnect backboard, pressure plates, and rear gate (paragraph 2-25.1).
2-25.2 Preparation for Movement. Inflate air shocks (paragraph 1-6.2).
2-25.3 Operating Instructions on Decals and Instruction Plates.
PLEASE NOTE - IMPORTANT
1.
Operating instructions must be carefully read before
operating machine.
2.
Line voltage and fuse specifications must be
according to model tag or machine cord.
3.
When connecting the machine to electric power,
correct direction of rotation of the motors must be
observed - see operating instructions.
4.
The machine will function properly when regularly
maintained
(cleaning-lubrication)
see
operating
instructions.
5.
Continuous overloading of the machine should be
avoided.
6.
In cases of malfunction check main- and machine
fuses first.
7.
Service and maintenance should only be performed
by experienced personnel.
8.
When ordering spare parts it is necessary to indicate
model, machine number and spare part number.
Important operating Instructions
Summary of the safety prescription for paper shredding machines
6.0
usage.
6.1
paper shredding machines should be operated by reliable persons who
have been instructed in their use: the basis of the instruction should be
familiarization with the operating instructions to be issued as standard
with the machines. servicing should only be carried out by qualified
maintenance staff.
6.2
the operating instructions issued as standard with the machines are to
be held available for inspection at all times, and are to be observed.
6.3
safety devices which are factory-fitted for the safe operation of the
machine must not be removed or modified in such a way that they
become functionally inefficient. this applies equally to mechanical
devices (such as gates, or hoppers, or attachments which, by their
design, function as safety elements) and to electrical circuit elements.
6.4
any damage or faults on paper shredding machines which prejudice the
safety of the employees are to be rectified immediately. until these
hazards are cleared, the paper shredding machines are to be
disconnected from the power supply.
6.5
material which is prone to forming loops, such as ribbon, or tapes, or
cords, must be cut or so pre-treated before feeding into paper shredding
machines that the danger of injury by being drawn in is excluded.
it is particularly important to ensure that dangling articles of clothing or
jewelry cannot be drawn into moving machinery.
a.
Operating instructions. Located on outside of front panel.
2-183
