TM 5-6675-315-14
(9)
Slide bag over bale chamber until bale chamber rests against bottom of bag.
NOTE
Be sure that bag is free of entanglements so it will come off smoothly and not catch when bale is
ejected.
(10)
Reinstall side pressure plates and reconnect connecting rod.
(11)
Lift backboard into position against bale chamber.
(12)
Lift spring-loaded locking sleeve and lower rear gate to engage backboard.
WARNING
Be sure safety lock is engaged over rear gate handle. Serious personnel injury could occur from
failure to observe this safety precaution.
(13)
Engage safety lock to secure rear gate handle in place.
2-177