TM 5-6675-315-14
f.
Place patch over damaged area and mark all around edges of patch.
g.
Drill holes 1 in. (25.4 mm) apart.
h.
Apply sealant to edges of patch.
i.
Apply patch to van body.
j.
Install pop rivets beginning at center of each side. Rivets should be
placed 1 in. (25.4 mm) apart.
k.
Paint as needed.
1-20.8
Replace Air Conditioner/Heater.
MOS:
63W, Wheel Vehicle Repairer
PERSONNEL: Two are required to perform this procedure.
TOOLS:
Cross Tip Screwdriver
Lifting Equipment
8 in. Adjustable Wrench
7/16 in. Combination Wrench
SUPPLIES: Air Conditioner/Heater
Solvent P-D-680 (Item 17, Appendix E)
Gasket
Sealant (Item 16, Appendix E)
Adhesive (Item 1, Appendix E)
1-100
