TM 5-6675-314-14
4-8. LUBRICAT
Section III OPERATOR MAINTENANCE
ON INSTRUCTIONS.
This equipment does not require lubrication.
4-9. TROUBLESHOOTING PROCEDURES.
a.
The table lists the common malfunctions which you may find during the
operation or maintenance of the vacuum cleaner, or its components.
You should
perform the test/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all test or
inspections and corrective actions.
If a malfunction is not listed or is not
corrected by listed corrective actions, notify your supervisor.
Table 4-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
VACUUM CLEANER MOTOR DOES NOT OPERATE.
Step 1. Check
(a)
(b)
Step 2. Check
(a)
(b)
Step 3. Check
(a)
power cord.
If plugged in, proceed to step 2.
Plug in power cord.
position of power switch.
If turned ON, proceed to step 3.
Turn power switch ON.
circuit breaker position in circuit breaker box.
If turned OFF or tripped, turn circuit breaker ON.
(b) If turned ON, refer to organizational maintenance.
4-10. MAINTENANCE PROCEDURES.
There are no operator maintenance procedures
assigned for this equipment.
4-12
