TM 5-6675-314-14
4-6.2 Operating Procedures .
4-6.2.1 Vacuum Cleaner.
a.
Using as vacuum.
(1) Attach dust COllection bag to air discharge opening.
(2) Remove protective screen lock from air intake opening, and attach scrap
trap to that opening.
(3) Attach swivel end of hose to scrap trap by turning lock to right until
secure.
(4) Attach tool required to other end of hose.
(5) Insert plug into 120 V ac wall outlet and position ON/OFF switch to ON.
b. Using as blower.
(1) Attach
(2) Attach
tapered rubber nozzle to discharge opening.
protective screen lock to air intake opening.
(3) Insert plug into 120 V ac wall outlet and position ON/OFF switch to ON.
c.
Using as sprayer.
(1) Attach protective screen lock to air intake opening.
(2) Attach swivel end of hose to air discharge opening by turning lock
to right until secure.
(3) Attach sprayer to other end of hose.
NOTE
Size of spray pattern is determined by adjusting screw located on top
of sprayer.
(4) Insert plug into 120 V ac wall outlet and position ON/OFF switch to ON.
4-9
