TM 5-6675-313-14
Table 1-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
Q
w
Q
B/D
w
W
D
W
D
B/M/
A
B - Before
W - Weekly
D - During
A N A n n u a l ly
M - Monthly
(Number) - Hundreds of Hours
s
- Semiannually
A - After
Cl - Quarterly
BI - Biennially
ITEM
NO.
1
2
TEM TO BE INSPECTED
PROCEDURE
VAN BODY - Cont
Inspect Exterior - Cont
11.
Inspect gaskets on personnel doors for leaks or
damage.
11.1 Inspect hinges for proper placement of hinge pins.
12.
Clean and paint blistered, pitted, or flaking
areas and bare metal spots in accordance with
instructions contained in TM 43-0139, Painting
Instructions for Field Use.
Inspect Interior.
1.
Test emergency lights by pressing test button.
2.
Inspect power cords and cables to be sure wires
are not kinked, cut, or cracked.
3.
Inspect plug connectors to be sure all plug
connectors are tight and firmly seated.
Tighten
if necessary.
4.
Inspect for burned out light bulbs and fluorescent
lamps.
Replace as required.
5.
Inspect walls, ceiling, and floor for holes,
open seams, or signs of seepage or leaks.
6.
Check storage cabinets for broken hinges,
latches, and locks.
7.
Inspect fire extinguishers. Be sure security
seals are not broken.
For Readiness
Reporting.
Equipment Is
Not Ready/
Available If:
Missing hinge
pins.
Emergency
lights do
not light.
Wires or
cables are
cracked or
cut t.
Leaks are
present.
Hinge,
latch, or
lock is
broken.
Fire extin-
guisher is
missing or
seals are
broken.
Change 2 1-19
