TM 5-6675-313-14
a.
Loosen screw and socket head setscrews. Remove defective inside door
handle.
b.
Remove cotter pin and pins from center latch arm assembly.
c. Move latch rods out of way.
d.
Punch roll pin from center latch arm assembly and pull latch arm
assembly from shaft.
e.
Withdraw latch and defective outside door handle.
f.
Inspect all components for wear.
g.
Replace worn O-ring washer and sleeve.
h.
Replace other worn components as needed.
i.
Reinstall shaft and new outside door handle.
j.
Aline center latch arm assembly on shaft. Secure with new roll pin.
k.
Aline latch rods.
Attach to latch arms with pins, washers, and new
cotter pine
l.
Reinstall new inside door handle.
m. Lightly oil all moving parts. Wipe up surplus oil.
1-91
