Section III. INSTALLATION
ARMY TM 5-6675-238-14
MARINE CORPS TM 08839A-14/1
INSTRUCTIONS
2-5. Installation Instructions.
d. Remove cables from transit case.
a. Press pressure relief valve on each transit case.
e. Press pressure relief valves and remove instru-
b. Remove SPU from transit case.
ment case covers from SPU and tape reader.
c. Remove tape reader from transit case.
f. Set test equipment on suitable work surface.
Section IV. PRELIMINARY ADJUSTMENT OF EQUIPMENT
2-6. General. The preliminary adjustments of the PADS
test set consist of performing the self-test procedures
described in paragraph 8-9.
2-3/( 2-4 blank)
