ARMY TM 5-6675-238-14
MARINE CORPS TM 08839A-14/1
CHAPTER 9
MATERIEL USED IN CONJUNCTION WITH MAJOR ITEM
9-1. General. A Teletypewriter TT-100/FG is used with
the PADS test set during testing and troubleshooting of
the PADS. The teletypewriter must be set up for full
duplex operation at a 75 baud rate (600 OPM drive
gear set). The reperforator-transmitter is used solely to
provide power to the keyboard-transmitter. The correct
teletypewriter set up is as follows:
a. Connect reperforator and keyboard power cables
to 115 VAC power.
b. Connect keyboard/perforator primary intercon-
nect cable (P10) together.
c. Connect SPU cable W212 terminal board to
teletypewriter.
d. Set reperforator MOTOR switch to OFF and
POWER switch to ON.
e. Ensure that keyboard LINE/BREAK switch is
set to LINE.
f. Ensure that SEND/LOCK switch is set to
SEND.
g, Ensure that POWER switch is set to ON.
h. Set MOTOR switch to OFF (later set to ON
when specified in table 8-6).
NOTE
For complete operation of the teletype-
writer, refer to TM 11-5815-200-12. For
operation of the teletypewriter during
testing and troubleshooting of the PADS,
refer to TM 5-6675-308-34 or TM
08837A-34/2.
Change 1
9-1/(9-2 blank)
