TM 5-3610-287-24
2-54. REPAIR FLUORESCENT LIGHT (CONT)
10. Remove hex nuts (12) and lamp ballast (13).
11. Install new lamp ballast (13) with hex nuts (12).
Install wires (9) on receptacles (10).
12.
Install receptacle brackets (8).
13.
14. Install black and white wires (6) with wire nuts (14).
Install wire ties (11) and wrap wires with electrical tape as needed.
15.
16. Install wiring guard (5).
Install fluorescent lamps (4).
17.
18. Install safety latches (3).
Install diffuser panel (2) with latches (1).
19.
Test operate by setting
20.
Set CEILING LIGHTS circuit breaker to ON.
light switch to ON.
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Cross-tip screwdriver
Materials/Parts
Diffuser panel insert
2-172
