TM 5-3160-287-24
2-47. REPAIR TELEPONE INSTALLATION (CONT)
3.
Close cover (2), then slide cover down.
4.
Remove two top screws (3) under cover (2).
Remove cover (2) and
seal (4).
5.
Install new seal (4) and new cover (2) with two top screws (3).
6.
Open cover (2) and install two bottom screws (1).
7.
Connect wires to binding posts.
8.
Test operate telephone.
EXTERIOR BINDING POSTS
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III. item 11)
Flat-tip screwdriver
Combination wrench
Materials/Parts
Binding Posts, 5940-00-272-1477
Lead pencil (appendix C, item 13)
Masking tape (appendix C, item 29)
2-132
