TM 5-3610-287-10
2-6.
ASSEMBLY AND PREPARATION FOR USE (CONT)
10. Pull PHASE TEST toggle switch (1) down.
CORRECT PHASE lamp (2)
should light.
CAUTION
Do not energize Section if INCORRECT PHASE lamp
l i g h t s .Damage to equipment may result.
Be sure voltage is between 110 and 120 Vat.
Frequency must be at 60 1 Hz on each leg.
Incorrect settings will damage equipment.
11. If CORRECT PHASE lamp (2) lights, turn PHASE switch (3) to A.
Read voltage and frequency. Repeat for positions B and C on PHASE switch.
2-29
