Figure 2-271.
TM 5-3610-286-20
(12) Rod holder. (figure 2-271)
(a) Remove four hex screws (1), lockwashers (2), lower rod holder (3), and upper rod
holder bracket (4).
(b) Remove wing nut (5), hex nut (6), Iockwasher (7), two washers (8), and locking
plate (9).
(c) Install locking plate (9), two washers (8), lock washer (7), hex nut (6), and wing
nut (5).
(d) Install upper rod bracket (4), lower rod holder (3), four washers (2), and hex
screws (1).
2-537
