TM 5-3610-286-20
2-77.
Gear Box Assembly (cont).
c. Install. (figure 2-213)
(1)
(2)
(3)
(4)
(5)
(6)
WARNING
Gear box (1) greatly exceeds 35 pounds. Use three persons to perform steps
(1) and (2).
Raise gear box (1) to aline locator pins (2) with holes in printing press, and support gear
box (1) with wooden blocks.
Install gear box (1), two locator pins (2), four washers (3), and hex-head screws (4).
Install two socket-head screws (5) from behind press D/S frame into gear box (1).
Remove wooden support blocks.
Install three socket-head screws (6) and oil line (7).
NOTE
Pulley exceeds 35 pounds. Use two persons to perform step (6).
Replace packing ring (8), V-belt pulley (9), threaded cover (10), and set screw (11).
2-432