TM 5-3610-286-20
2-77.
Gear Box Assembly (cont).
(b) Lubrication system pump assembly. (figure 2-212)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2-430
Replace pipe (1), washer (2), and plug (3).
Replace cover plate (4), gasket (5), eight washers (6), and screws (7).
Replace gasket (8), 0il level indicator (9), plate (10), six washers (11), and round-
head screws (12).
Replace oil filter (13), gasket (14), four washers (15), and socket-head
screws (16).
Replace fitting (17).
Replace oil tube (18) and connecting piece (19).
Replace relief valve (20) and packing ring (21).
Attaching bearing bracket (22) to lubrication pump (23) and replace pinion gear (24)
and retaining ring (25) on pump shaft before fully seating shaft in bracket.
Replace two washers (26) and socket-head screws (27).
Seat retaining ring (25) in groove in pump shaft.
Replace suction screen (28), fitting (29), and oil tube (30).
Replace bearing bracket (22), two washers (31), and socket-head screws (32).
Replace bearing (33), bearing flange (34), four washers (35), and socket-head
screws (36).
Replace oil tube (37) and fittings (38, 39).
Replace fitting (40) and oil tube (18) on lubrication pump (23).
