TM 5-3610-286-20
2-71 .
Engaging Lever Latch Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
Retaining-ring pliers
Main guard assembly (D/S) removed (para. 2-20)
Ball-peen hammer
Engaging lever compression spring removed
4 mm pin punch
(para. 2-36, step (1)
Blanket cylinder drive gear removed (para. 2-75)
a.
Remove. (figure 2-189)
(1) Remove two tapered pins (1).
(2) Remove spring tension pin (2) and pin (3).
(3) Remove engaging lever latch assembly (4).
2-390
