TM 5-3610-285-14
e. Withdraw receptacle to gain access to wires.
f. Loosen terminal screws and ground screw. Disconnect wires.
g. Reconnect wires. Connect green (ground) wire first.
h. Install new receptacle.
i. Guide receptacle into wire guide.
NOTE
Be sure wires are not kinked or strained.
j. Secure receptacle with screws.
k. Reinstall cover plate. Secure with screws.
l. Turn on receptacle circuit breaker.
1-16.7 Replace Wire Molding.
MOS: 83FJ6, Reproduction Equipment Repairer
or
41B, Topographic Instrument Repair Specialist
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
Hacksaw
Drill
Drill Bits
File
Machinist's Rule
Electrical Repair Kit
Paint Brush
Multimeter
Flashlight
SUPPLIES: Paint (Item 37, Appendix E)
Cheesecloth (Item 14, Appendix E)
Conduit Base
Conduit Cover
Padlock
1-68