TM 5-3610-285-14
WARNING
Death or serious injury may occur from electrical shock if lighting circuit breaker is not turned
off before working on lamp assembly.
NOTE
Alternate lighting is required to perform this task.
a. Turn circuit breaker OFF.
b. Remove two screws and cover plate.
c. Note notch on label plate. Remove bezel nut and label plate, and cover plate from defective switch.
NOTE
Note position of cover and reinstall as noted.
d. Tag and disconnect wires from defective switch.
e. Install new switch and connect wires.
NOTE
Be sure label plate is in the same direction as when removed.
f. Insert switch through cover plate and label plate. Secure with bezel nut.
g. Aline cover plate with holes and secure with screws.
h. Turn circuit breaker ON.
1-63
