TM 5-3610-285-14
(1)
Changing filter.
(a)
Unplug power cord.
(b)
Open latch.
(c)
Lower cover.
(d)
Select proper filter.
(e)
Place filter glass inside so that filter identification can be read from outside.
(f)
Close and latch cover.
(g)
Plug in power cord.
(2)
Positioning safelight.
(a)
Loosen wingnuts on mounting bolts holding safelight in place
(b)
Position safelight so that it provides desired illumination. For direct illumination, safelight should face work
area. For indirect illumination, it should face wall.
10-15
