TM 5-3610-285-14
Table 10-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
IN
Reporting
ITEM
TER-
PROCEDURE
Equipment Is
NO.
VAL
Not Ready/
Available If:
SUPPORT ITEMS - Cont
4
B/D
Inspect Contact Printing Lamp - Cont
3.
Inspect power cord going to lamp for broken
Plug damaged,
wires, frayed insulation, or damaged plug.
frayed insula-
tion, or broken
wires.
4.
Plug in power cord for timer/power supply
control box.
5.
Turn on power switch for timer/power supply
control box.
6.
Be sure lamp power cord is plugged into
control box.
7.
Set intensity dial to 1.
Dial cannot
be set.
8.
Set timer to 55 seconds. Timer cannot be
set.
9.
Press start button and verify lamp lights
Lamp does not
dimly.
light.
10.
Change intensity dial slowly, increasing the
Lamp does not
intensity until dial reaches 6.
increase in
intensity for
each setting.
11.
Verify that lamp turns off after time
Lamp does not
elapses.
turn off.
12.
Turn off power switch for timer/power supply
control box.
5
W
Inspect Mason-Type Psychrometer.
1.
Inspect thermometers for damage.
Thermometers
are damaged.
10-12
