TM 5-3610-285-14
c.
Remove defective cabinet from van.
d.
Install new cabinet, and secure to wall mounting bracket with hex head bolts and lockwashers. Do not tighten
bolts.
e.
Secure plate storage cabinet to floor with lag bolts and flat washers.
f.
Tighten hex head bolts securing cabinet to wall mounting bracket.
9-16.8 Remove/Install Folding Transmission Probe Table.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Cross Tip Screwdriver
SUPPLIES: Folding Work Surface
a.
Raise folding transmission probe table to in-use position, parallel to floor.
b.
Remove four cross head bolts securing folding brackets to van's wall mounting brackets.
c.
Remove defective folding transmission probe table.
d.
Install new transmission probe table and secure to wall mounting brackets with four cross head bolts through
folding brackets.
NOTE
To remove transmission probe from folding table, refer to paragraph 7-16.19.
9-13
