TM 5-3610-285-14
c.
Remove hex head bolts securing back of cabinet to wall bracket.
d.
Remove fifteen bolts, nuts, flat washers and lockwashers securing cabinet to the cabinet base.
e.
Remove defective photolithographic cabinet from van.
f.
Install new 10-drawer photolithographic cabinet and center evenly on cabinet base.
g.
Reinstall fifteen bolts, nuts, flat washers and lockwashers to secure cabinet to cabinet base.
h.
Reinstall three hex head bolts to secure back of cabinet to wall bracket.
i.
Reinstall drawers in cabinet.
j.
Reinstall contact vacuum frame (paragraph 6-16.11).
9-10
