TM 5-3610-285-14
h.
Install wire nuts.
i.
Push wires back into hole in lamp mounting block.
j.
Secure lamp with screws after checking alinement (paragraph 7-16.17).
k.
Reinstall plastic table platen.
l.
Plug in power cord.
7-16.2 Replace Reflection Probe Lamp.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
SUPPLIES: Lamp
Wire Nuts
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged
before repairing equipment.
a. Unplug reflection probe cable.
b. Remove two screws holding probe housing cover in place.
c. Remove cover carefully to prevent damage to wires attached to read pushbutton.
7-36
