TM 5-3610-285-14
Table 6-4. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. VACUUM PUMP DOES NOT BUILD UP CORRECT VACUUM-Cont
(b) If leaks are found around vacuum frame, adjust left- and right- and latches to lock glass frame down
tightly.
(c) If latches cannot be adjusted enough, replace vacuum blanket assembly (paragraph 6-16.1).
Step 3. Check for defective vacuum bleed valve as follows:
WARNING
Death or serious injury may occur from electrical shock unless power cord is
unplugged before servicing.
(a) Unplug power cord for vacuum control box.
(b) Remove cover plate on underside of control box.
6-34
