TM 5-3610-285-14
g.
Drill out rivets and remove cover plates from outer van wall.
h.
Support tank with a suitable lifting device.
i.
Remove nuts, washers, and bolts retaining tank to wall. Remove tank.
j.
Replace tank and retain with bolts, washers, and nuts.
k.
Apply silicone sealant to outer edge of cover plate.
l.
Reinstall cover plates and retain with new rivets.
m.
Apply teflon tape to threads of tank fittings. Reinstall fittings.
n.
Reinstall all plumbing lines.
o.
Apply teflon tape to threads of sight gage. Reinstall sight gage.
p.
Reinstall heating element (paragraph 5-16.20).
q.
Reinstall thermostat and sensing bulb (paragraph 5-16.21).
r.
Refill recirculation tank with fresh water.
s.
Check tank and fittings for leaks.
t.
Turn on circuit breaker (CB7) and HEATER switch.
5-225
