TM 5-3610-285-14
Table 5-5. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
ROLLERS DO NOT ROTATE WHEN CIRCUIT BREAKER AND MAIN DRIVE SWITCHES ARE ON - Cont
WARNING
Electrical shock hazard. You must stand on rubber matting while performing this
procedure.
Step 4. Check voltage between leads 19 and 20 of control unit A1.
(a)
If approximately 110 V ac is indicated, proceed to step 5.
(b)
If voltage is not indicated, refer to higher level of maintenance.
5-101
