TM 5-3610-285-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
IN
Reporting
ITEM
TER-
PROCEDURE
Equipment Is
NO.
VAL
Not Ready/
Available If:
VAN BODY - Cont
2
Inspect Exterior - Cont
W
2.
Inspect power cords and cables to be sure
Wires or cables
wires are not kinked, cut, or cracked.
are cracked or
cut.
W
3.
Inspect plug connectors to be sure all plug
connectors are tight and firmly seated.
Tighten if necessary.
D
4.
Inspect for burned out light bulbs and
fluorescent lamps. Replace as required.
W
5.
Inspect walls, ceiling, and floor for holes,
Leaks are
open seams, or signs of seepage or leaks.
present.
D
6.
Check storage cabinets for broken hinges,
Hinge, latch,
latches, and locks.
or lock is
broken.
B/
7.
Inspect fire extinguishers. Be sure
Fire extin-
M/A
security seals are not broken.
guisher is
missing or
seals are
broken.
Q
8.
Inspect circuit breaker panel.
Circuit
breaker is
defective.
NOTE
Inspection is to be conducted on a not-to-
interfere basis with work being conducted.
Individual equipment will be inspected as
directed by the appropriate chapter of
this manual.
1-19
