TM 5-3610-285-14
2-16.22 Remove/Install Flip-Top Platemaker.
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Three persons are required to perform this procedure.
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
Combination Wrench Set
Hex head Key Wrench Set
3/8 in. Socket Set
Fork Lift
SUPPLIES: Flip-Top Platemaker
WARNING
Death or serious injury may occur from electrical shock unless power is turned off before servicing.
Serious injury may occur if inadequate number of personnel are used to remove/install this equipment. The flip-top
platemaker weighs 500 lbs.
a.
Turn off power panel circuit breaker.
b.
Loosen two screws and remove utility box cover.
c.
Tag and disconnect input power wires.
d.
Remove glass light shield and store in glass holder.
e.
Position two vacuum frame holddown brackets to secure vacuum frame.
f.
Remove metal halide exposure lamp and store.
g.
Remove conduit locking nut, and remove conduit from utility box.
2-96
