TM 5-3610-285-14
c.
Remove mounting screws for control panel.
d.
Carefully lift control panel from its mount to gain access to wiring.
e.
Tag and disconnect wires from defective indicator lamp.
f.
Push in spring clip retainer around indicator and remove defective indicator lamp through top of control panel.
g.
Install new indicator lamp through top of control panel and snap into place.
h.
Reconnect wiring to new indicator.
i.
Carefully lift control panel onto its mount.
j.
Reinstall mounting screws for control panel.
k.
Rotate glass frame into horizontal position and lock into place with frame release knob.
l.
Turn on power panel circuit breaker.
2-79