TM 5-3610-285-14
WARNING
If platemaker has been used recently, the glass light shield will be extremely hot, and may cause serious burns. To
prevent injury, use gloves or rags when removing glass light shield.
(3) Using white gloves, carefully remove glass light shield and store in glass holder on wall.
(4) Reinstall two hex head screws and clamps on each side of reflector.
(5) Rotate glass frame into horizontal position and lock into place with frame release knob. -
c. Rotate two vacuum frame holddown brackets on corners to lock vacuum frame in place.
d. Removal of metal halide exposure lamp.
(1) Remove safety screw from lower cabinet door.
(2) Turn door knob and open lower cabinet door.
2-25
