4.2.2
a.
b.
c.
d.
TM 5-3610-259-14
OPERATOR’S PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Always keep in mind the WARNINGS and CAUTIONS when performing PMCS. Table
4-1 lists the PMCS procedures to be performed by the operator. Be sure to
perform the PMCS at the frequency indicated by the INTERVAL codes in the
table.
If your equipment fails to operate, troubleshoot with the proper equipment.
Report any deficiencies in accordance with DA PAM 738-750.
If the equipment
and service only
serviced without
NOTE
must be kept in continuous operation, check
those items that can safely be checked and
disturbing operation.
checks and services when the equipment
The numbers found in the ITEM NUMBER column
numbers for the TM NUMBER column on DA Form
Make the complete
can be shut down.
shall be used as a source of item
2404. Equipment Inspection and
Maintenance Worksheet, in recording the results of PMCS.
List of tools and materials required for PMCS is as follows:
Item
Quantity
Flat-Tipped Screwdriver
1
Rags
ar
Bucket
1
4-3
