TM 5-3610-259-14
Blackout Override Switch
Bypasses blackout switch.
Blackout Switch
Turns off white lights
when door is opened.
Phase, Frequency, and Voltage Indicator
Monitors electrical power
phase, frequency, and
voltage.
Level Indicators
Aids in leveling van
body, ensuring proper
equipment operation.
1.2.2
a.
b.
c.
d.
1-14
OPERATOR’S PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Always keep in mind the WARNINGS and CAUTIONS when performing PMCS. Table
1-1 lists the PMCS procedures to be performed by the operator. Be sure to
perform the PMCS at the frequency indicated by the INTERVAL codes in the
table.
If your equipment fails to operate, troubleshoot with the proper equipment.
Report any deficiencies in accordance with DA Pam 738-750.
If the equipment
and service only
serviced without
NOTE
must be kept in continuous operation, check
those items that can safely be checked and
disturbing operation. Make the complete
checks and services when the equipment can be shut down.
The numbers found in the ITEM NUMBER column shall be used as a source of item
numbers for the TM ITEM NUMBER column on DA Form 2404, Equipment Inspection
and Maintenance Worksheet, in recording the results of PMCS.
List of tools and materials required for PMCS is as follows:
Item
Quantity
Wire Brush
1 ea
Adjustable Wrench (6 in.)
1 ea
Flat-Tipped Screwdriver
1 ea
Vacuum Cleaner
1 ea
Cleaning Cloths
Bucket
1 ea
General Purpose Detergent
ar
Emery Cloth
Eye Dropper
1 ea
