TM 5-3610-259-14
c.
d.
e.
f.
9.
h.
i.
j.
k.
Remove mounting screws for control panel.
Carefully lift the control panel from its mount.
Tag and disconnect wires for proximity switch at the terminal block
behind the control panel.
Remove mounting screws and defective proximity switch. From the
proximity switch, pull wiring through the platemaker frame.
Install new proximity switch with wiring, and thread wiring through the
frame, to the terminal block behind the control panel.
Reconnect wires for proximity switch at the terminal block.
Replace control panel on its mount, and secure with mounting screws.
Rotate glass frame into horizontal position and lock into place with
frame release knob.
Turn on power panel circuit breaker.
2-55
