TM 5-3610-259-14
5. Loosen hose clamps at both ends of drain hose and remove hose.
6.
Unscrew elbow from drain T-fitting.
7.
Remove lag bolts securing sink to section floor.
8. Pull sink forward to clear sink drain T-fitting and remove sink from
section.
9. Position new sink and secure to floor with lag bolts.
10. Apply thread sealant to union and secure union.
11.
Apply thread sealant to elbow and screw into drain T-fitting.
12.
Reinstall drain hose and tighten hose clamps.
13. Apply water to sink and check for leaks. Close cabinet doors.
14.
Reinstall Plate Finishing Table (para 1.4.7.4).
15. Reinstall Drafting, Scribing/Tracing Table (para 1.4.7.1).
1-96
